Installation Instructions

ManualsBrandsToro ManualsAttachmentsRoll-Over Protection Structure, Multi-Pro 5500

FormNo.3351-684RevA

Roll-OverProtectionSystem(ROPS)

forMulti-Pro5000SeriesTurfSprayer

ModelNo.41566

InstallationInstructions

Safety

Note:TheRoll-OverProtectionSystem(ROPS)will

reducetheriskofseriousorfatalinjuryintheevent

ofatipover,althoughthesystemcannotprotectthe

operatorfromallpossibleinjuries.

Whenusedalone,therollbarcannotprovide

completeprotectionagainstpersonalinjury.

Alwaysusetheseatbeltandrollbartogether.

AlteringtheROPSinanymannermayaffectits

durabilityanduse,whichmayresultininjury

ordeath.

ReplaceadamagedROPS.Donotrepairor

modifyit.AnyalterationoftheROPSmustbe

approvedbythemanufacturer.

SafetyandInstructional

Decals

Safetydecalsandinstructionsareeasily

visibletotheoperatorandarelocated

nearanyareaofpotentialdanger.

Replaceanydecalthatisdamagedor

lost.

93-9850

1.Donotrepairorrevise—readtheOperator’sManual.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA.

AllRightsReserved

Summary of content (8 pages)

PAGE 1
Form No. 3351-684 Rev A Roll-Over Protection System (ROPS) for Multi-Pro 5000 Series Turf Sprayer Model No. 41566 Installation Instructions Safety Note: The Roll-Over Protection System (ROPS) will reduce the risk of serious or fatal injury in the event of a tip over, although the system cannot protect the operator from all possible injuries. Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger.
PAGE 2
106-4969 1. Warning—avoid tipping the machine. 2. Wear the seat belt. 4. Hold tight and brace your feet. 5. Lean away from the direction the machine is tipping. 3. Do not jump from a tipping machine.
PAGE 3
Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 3 Description Use Qty.
PAGE 4
3 2 5 2 1 4 Installing the Seat Belts 6 Parts needed for this procedure: 2 Seat belt assembly 1 Outside belt support, Left-hand 1 Outside belt support, Right-hand 1 Inside belt support, Left-hand 1 Inside belt support, Right-hand 2 Seat belt support strap 1 Support, Right-hand 1 Support, Left-hand 1 Support (5700), Right-hand 1 Support (5700), Left-hand 8 Carriage bolt (5/16 x 3/4 inch) 4 Washer (1/2 inch) 6 Flange locknut (5/16 inch) 2 Carriage bolt (5/16 x 1 inch) 6 Bol
PAGE 5
8 13 9 3 12 8 11 2 1 4 10 7 6 5 7 14 Model 5700 Support G009581 Figure 2 1. ROPS mounting bracket 5. Left-hand seat box support 2. Seat box 6. Bolt (7/16 x 1-1/4 inch) 3. Driver’s side, rear console 7. Flange locknut (7/16 inch) mounting bolt and flat washer 4. Left-hand, inside belt support 8. Carriage bolt (7/16 x 1-1/4 inch) 9. Carriage bolt (5/16 x 3/4 inch) 10. Flange locknut (5/16 inch) 13. Seat belt assembly 14. Left-hand seat box support, 5700 Models 11. Latch 12. Switch cover 5.
PAGE 6
3 Installing the ROPS Bar Parts needed for this procedure: 1 ROPS bar 8 Bolt (5/8 x 1-1/2 inch) 8 Lockwasher (5/8 inch) 8 Nut (5/8 inch) Procedure 1. Position the ROPS bar over the ROPS mounting brackets on each side of the sprayer frame behind and below the seats (Figure 3). 3 1 4 2 5 G009582 Figure 3 1. Lockwashers and nuts (5/8 inch) 2. ROPS mounting brackets 3. ROPS bar 4. Sprayer frame 5. Bolts (5/8 x 1-1/2 inch) 2.
PAGE 7
Notes: 7
PAGE 8