Installation Instructions

FIG. 7

1. Refrigeration Hoses 4. Rear Window 7. L.H. Side Panel 10. Front Seat Box Panel

2. 'R' Clamps 5. Rear Window Clamp 8. Spacer 11. Front Bar Ass'y

3. ROPS Bar 6. Rear Cab Panel 9. Rubber Flap

Seat Belt Buckle Installation:

1. Remove rear carriage bolt and nut securing

R.H. Hip restraint to rear of Seat Box Panel;

DISCARD BOLT and SAVE NUT and WASHER for

future use. Install Seat Belt Support Strap under

Seat Box Panel and R.H. Outside Seat Belt Support

on top of Panel. Secure with (2) 5/16" x 3/4" carriage

bolts and (2) flange locking nuts. Replace bolt

removed earlier with 5/16" x 1 1/4" carriage bolt

and use existing nut and washer. Tighten fasteners

securely. See FIG. 8. (Repeat on L.H. Side).

FIG. 8

1. R.H. Hip Restraint 4. R.H. Outside Seat Belt

2. Seat Box Panel Support

3. Seat Belt Support Strap 5. Seat Belt Buckle Ass'y

1044

5. Install Inlet Cap onto Air Intake Extension.

2. Secure Seat Belt Buckle Ass'y to Outside Belt

Support with (1) 7/16" x 1 1/4" capscrew and flange

locking nut.