Operator's Manual

ManualsBrandsToro ManualsAttachmentsFoam Marker Kit, Multi Pro 1200/1250/5600 Turf Sprayers

MODEL NO. 41572

FORM NO. 104-8842

OPERATORS

INSTRUCTIONS

FOAM MARKER KIT

for MULTI PRO

5500, 1200, 1250 & 300T TURF SPRAYER

To assure maximum safety, optimum

performance, and to gain knowledge of

the product, it is essential that you or any

other operator of this equipment read and

understand the contents of this manual

before the vehicle engine is ever started.

Pay particular attention to the SAFETY

INSTRUCTIONS highlighted by the

triangular safety alert symbol.

The safety alert symbol means

CAUTION, WARNING, or DANGER

 personal safety instruction. Failure to

comply with the instruction may result in

personal injury.

A. Select the proper chemical for the job.

B. Follow the manufacturer's instructions

on chemical container labels. Apply and

handle chemicals as recommended.

C. Handle and apply chemicals with care.

Wear goggles and other necessary protective

equipment. Handle chemicals in well

ventilated areas. Never smoke while handling

chemicals.

D. Properly dispose of chemical container

and unused chemicals.

SAFETY INSTRUCTIONS

Keep this Operators Manual in the plastic tube behind the operator seat.

It is very important that all persons operating this equipment have easy access to these instructions at all

times.

Carefully read and follow the Installation Instructions that are provided with this equipment and the Safety

Instructions in the MULTI PRO

Operators Manual.

RECOGNIZE SAFETY INFORMA-

TION This safety-alert symbol is used to

call attention to a dangerous situation,

which could result in serious injury or death to the

operator or a bystander. Safety, mechanical and

some general information in this manual are

emphasized. DANGER, WARNING and

CAUTION identify safety messages. Whenever

the triangular safety symbol appears, it is followed

by a safety message that must be read and

understood. For more details concerning safety,

read the Safety Instructions that follow.

IMPORTANT identifies special mechanical

information and NOTE identifies general

information worthy of special attention.

These instructions are provided as a guide for the

safe operation and maintenance of this equipment.

However, the operators personal safety, as well

as those persons in the work area, will depend on

the careful actions and good judgement of the

operator. To reduce the potential for injury or

death, comply with the following safety

instructions.

BEFORE OPERATING:

1. Operate this accessory only after reading and

understanding the contents of this manual. A

replacement manual is available by sending

complete model and serial number to: Hahn

Equipment Co., A subsidiary of The Toro

Company, 1625 N. Garvin, Evansville, IN 47711-

4596.

2. Learn how to operate the Foam Marker and

how to use the controls properly. Do NOT let

anyone operate this equipment without first

receiving thorough instructions.

3. Keep all shields, safety devices, and decals

in place. If a shield, safety device, or decal is

malfunctioning, illegible or damaged, repair or

replace it before operating the machine.

4. Chemicals can injure persons, animals,

plants, soils or other property. To eliminate

environmental damage and personal injury:

Summary of content (8 pages)

PAGE 1
FORM NO. MODEL NO. 41572 for MULTI PRO ® To assure maximum safety, optimum performance, and to gain knowledge of the product, it is essential that you or any other operator of this equipment read and understand the contents of this manual before the vehicle engine is ever started. Pay particular attention to the SAFETY INSTRUCTIONS highlighted by the triangular safety alert symbol.
PAGE 2
SAFETY INSTRUCTIONS AND DECALS WHILE OPERATING: 8. Keep all nuts, bolts and other fasteners tightened securely. Replace any shields removed during servicing or adjustments. 5. Make certain everyone is clear of the machine before starting the engine. 6. If equipment begins to vibrate abnormally, stop immediately. Shut off the vehicle engine and disengage all power. Repair all damage before commencing operation. 7. Before servicing or making any adjustments to the Foam Marker: A.
PAGE 3
OPERATION FILLING AND ADJUSTING: 1. Ensure the Right and Left Boom Switches located on the console are in the OFF position. CAUTION The contents of the Foam Marker Tank are under pressure. Loosening fittings under this condition could result in personal injury. C. Wait 1minute, then check the consistency of the foam. Adjustments may be required to achieve desired foam marker consistency. Refer to FOAM DENSITY ADJUSTMENT VALVE pg. 2 9.
PAGE 4
MAINTENANCE EVERY 100 HOURS (Fig. 2): 1. Inspect the hose between the Foam Tank and Compressor for water accumulation. No water should be found in this hose. (If a problem exists, remove the brass Check Valve in the Tee on top of the Compressor. Inspect, clean, or replace as needed.) 2. Remove and clean the Strainer at top of Solenoid Valve next to the Compressor. 4. Check Compressor Air Filter for cleanliness. 5. Make sure the bottom of the compressor is free and clear of debris. EVERY 250 HOURS (Fig.
PAGE 5
PAGE 6
PAGE 7
PAGE 8
The Toro General Commercial Products Warranty A Two-Year Limited Warranty Conditions and Products Covered The Toro Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrant your 1996 or newer Toro Commercial Product (Product) purchased after January 1, 1997, to be free from defects in materials or workmanship for two years or 1500 operational hours*, whichever occurs first.