Operator's Manual

2
8. Keep all nuts, bolts and other fasteners
tightened securely. Replace any shields removed
during servicing or adjustments.
9. Safety and instruction decals are installed on
this equipment. If any become damaged or
illegible, replace them. Decal part numbers are
listed in the parts catalog. Order replacements
from your Authorized Toro Distributor.
10. To be sure of optimum performance and
safety, always purchase genuine TORO
replacement parts and accessories. Replacement
parts and accessories made by other
manufacturers could be dangerous. Altering this
equipment in any manner may affect the
machines operation, performance, durability or
its use may result in injury or death. Such use
could void the product warranty of The TORO
Company.
SAFETY INSTRUCTIONS AND DECALS
WHILE OPERATING:
5. Make certain everyone is clear of the
machine before starting the engine.
6. If equipment begins to vibrate abnormally,
stop immediately. Shut off the vehicle engine
and disengage all power. Repair all damage
before commencing operation.
7. Before servicing or making any adjustments
to the Foam Marker:
A. Stop the vehicle and set the parking
brake.
B. Shut off the vehicles engine and remove
key from ignition.
C. Disengage all power and wait until all
moving parts have stopped.
RIGHT BOOM SWITCH: Activates the
compressor, generating a flow of foam to the
Right Boom Section.
LEFT BOOM SWITCH: Activates the
compressor, generating a flow of foam to the Left
Boom Section.
NOTE: Foam can be dropped simultaneously
from both Boom sections.
SIGHT GAUGE: Hose located on side of Tank.
Indicates level of solution in Tank.
CONTROLS
FOAM DENSITY
RELEASE
PRESSURE
BEFORE
REMOVING
FILL CAP.
ADJUSTMENT VALVE
PRESSURE RELIEF VALVE
94-7287
94-7275
Part No. 94-7275; Located on the Top
Center of the Compressor Cover
Part No. 94-7287; Located on the Bottom
Left Corner of the Compressor Cover
FOAM DENSITY ADJUSTMENT VALVE:
Controls the consistency of the foam solution.
DECREASING, lowers the amount of water,
creating markers which will "hold shape".
INCREASING, will create a more watery marker.
Note: A slightly watery marker consistency
may be helpful on a windy day.
PRESSURE RELIEF VALVE: When in upright
position, relieves pressure in Foam Solution
Tank.