Installation Instructions

7
Safety and Instruction Decals
Safety decals and instructions are easily
visible to the operator and are located near
any area of potential danger. Replace any
decal that is damaged or lost.
106-5211
1. Boom spray
2. Hand spray
3. Continuous variable
setting
4. Increase
5. Decrease
Operation
Fluid under pressure can penetrate skin and cause
injury.
• Keep your body and hands away from nozzles
that eject high pressure fluid.
• Do not aim the sprayer at any person or animal.
• Make sure all fluid hoses and lines are in good
condition and all connections and fittings are
tight before applying pressure to the system.
• Use cardboard or paper to find leaks.
• Safely relieve all pressure in the system before
performing any work on it.
• Get immediate medical help if fluid is injected
into skin.
• Hot liquids and chemicals can cause burns or
other harm.
Warning
Switching from Boom Spray
Mode to Hand Spray Mode
1. Stop the machine and set the parking brake.
Driving while using the hand sprayer can cause
loss of control, resulting in injury or death.
Do not operate the hand sprayer while driving.
Warning
2. Ensure that the pump switch is on and the Pro Control
(if applicable) is set in the manual position.
3. Set the throttle 3/4 of the way toward the Fast position.
4. Ensure that the trigger lock on the spray gun is locked.
5. Turn the pressure control knob all the way
counter-clockwise (Fig. 17).
1
2
Figure 17
1. Control handle 2. Pressure control knob
6. Move the control handle clockwise, pointing up
(Fig. 17).
7. Turn on the pump and agitation switches.
8. Adjust the rate control switch to the maximum pressure
setting and reduce the throttle setting to achieve the
desired pressure.
9. Use the pressure control knob to adjust the hand spray
pressure (Fig. 17).
Note: The maximum pressure is 150 psi.