Operator's Manual

FormNo.3366-836RevB

CoveredBoomKit

Multi-Pro

5700/5800TurfSprayerwithTruss-StyleBoom

ModelNo.41602—SerialNo.311000001andUp

OperatorManual

Figure1

1.Washerplate(18)6.Flangenut,5/16inch(2)11.Model/serialnumberdecal

2.Spraynozzle(properlyoriented)7.Hexheadscrew,3/8x1-1/4inch(4)

12.Regulatorydecal

3.Wingboom(2)8.Centerboombracket(2)13.Centerboomcover

4.Carriagescrew(2)9.Flangenut,3/8inch(4)14.Wingboomcover(2)

5.Drainvalvemountbracket

10.U-nut(16)15.Hexheadscrew,5/16x1-1/4inch(16)

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

PAGE 1
Form No. 3366-836 Rev B Covered Boom Kit Multi-Pro® 5700/5800 Turf Sprayer with Truss-Style Boom Model No. 41602—Serial No. 311000001 and Up Operator Manual Figure 1 1. 2. 3. 4. 5. Washer plate (18) Spray nozzle (properly oriented) Wing boom (2) Carriage screw (2) Drain valve mount bracket © 2011—The Toro® Company 8111 Lyndale Avenue South Bloomington, MN 55420 6. 7. 8. 9. 10.
PAGE 2
Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 3 4 Description Qty.
PAGE 3
2 4 Install the Wing Boom Covers Checking the Clearance of the Boom Covers Parts needed for this procedure: 2 Wing boom cover 16 Washer plate 12 U-nut 12 Hex head screw, 5/16 x 1-1/4 inch No Parts Required Procedure Verify that the center boom cover and the wing boom covers do not bind when the booms are lowered, and adjust the covers as needed. Procedure 1. Orient the spray nozzles on both wing booms straight downward so that it can fit in the holes of the wing boom covers. 2.
PAGE 4