Installation Instructions

ManualsBrandsToro ManualsAttachmentsHand Spray Gun Kit, 2014 and Before Multi-Pro 5800 Turf Sprayer

FormNo.3372-613RevB

HandSprayGunKit

Multi-Pro

5800TurfSprayer

ModelNo.41605—SerialNo.313000001andUp

InstallationInstructions

Thehandspraygunkitisanattachmentforaturfspray

applicationvehicleandisintendedtobeusedbyprofessional,

hiredoperatorsincommercialapplications.Itisprimarily

designedforsprayingonwell-maintainedlawnsinparks,golf

courses,sportselds,andoncommercialgrounds.

ThisproductcomplieswithallrelevantEuropeandirectives.

Fordetails,pleaseseetheseparateproduct-specic

DeclarationofConformity(DOC)sheet.

WARNING

CALIFORNIA

Proposition65Warning

Thisproductcontainsachemicalorchemicals

knowntotheStateofCaliforniatocausecancer,

birthdefects,orreproductiveharm.

Useofthisproductmaycauseexposureto

chemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orother

reproductiveharm.

Readthismanualcarefullytolearnhowtooperateand

maintainyourproductproperly.Theinformationinthis

manualcanhelpyouandothersavoidinjuryandproduct

damage.AlthoughTorodesignsandproducessafeproducts,

youareresponsibleforoperatingtheproductproperlyand

safely.

YoumaycontactTorodirectlyatwww.Toro.comforproduct

andaccessoryinformation,helpndingadealer,ortoregister

yourproduct.

Wheneveryouneedservice,genuineToroparts,oradditional

information,contactanAuthorizedServiceDealerorToro

CustomerServiceandhavethemodelandserialnumbersof

yourproductready.

Figure1illustratesthelocationofthe

modelandserialnumbersontheproduct.

Figure1

1.Modelandserialnumberplate

ModelNo.

SerialNo.

Safety

Thismanualidentiespotentialhazardsandhassafety

messagesidentiedbythesafetyalertsymbol(Figure2),

whichsignalsahazardthatmaycauseseriousinjuryordeath

ifyoudonotfollowtherecommendedprecautions.

Figure2

1.Safetyalertsymbol

Thismanualuses2otherwordstohighlightinformation.

Importantcallsattentiontospecialmechanicalinformation

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3372-613*B

Summary of content (12 pages)

PAGE 1
Form No. 3372-613 Rev B Hand Spray Gun Kit Multi-Pro® 5800 Turf Sprayer Model No. 41605—Serial No. 313000001 and Up Installation Instructions The hand spray gun kit is an attachment for a turf spray application vehicle and is intended to be used by professional, hired operators in commercial applications. It is primarily designed for spraying on well-maintained lawns in parks, golf courses, sports fields, and on commercial grounds. your product ready.
PAGE 2
and Note emphasizes general information worthy of special attention. • Do not use the hand sprayer if the hose, trigger lock, Read also the safety and operation instructions in the vehicle Operator’s Manual. • Do not aim the hand sprayer at any person or animal. Fluids under high pressure can penetrate skin and cause severe injury, possibly resulting in amputation or death. Hot liquids and chemicals can also cause burns or injury.
PAGE 3
Installation Loose Parts Use the chart below to verify that all parts have been shipped. Procedure 1 2 3 4 5 6 Description Use Qty. No parts required – Hose hook Washer (3/8 inch) Locknut (5/16 inch) Carriage bolt Manual valve assembly Threaded rod Locknut Washer Jam nut Control box and bracket assembly Bolt (1/4 x 5/8 inch) Locknut (1/4 inch) Hose Hose clamp Long hose with fitting Spray gun Hose clamp, small 2 2 2 2 1 4 8 6 8 1 3 3 1 2 1 1 1 Prepare the machine. Installing the hose hooks.
PAGE 4
1 2 3 4 G020081 Figure 4 Figure 3 6. Locknut (5/16 inch) 3. Hose hook (2) 7. Tank strap fasteners (newer style) 3. Bypass valve assembly 2. Left-hand mount bracket 4. Right-hand mount bracket 2. Secure the boom valves together with 2 cable ties from loose parts, and remove the right-hand bracket. 1. Tank strap fasteners (older 5. Washer (3/8 inch) style) 2. Front tank strap 1.
PAGE 5
Note: Install the elbow that you previously removed with the bend pointing upward. 6. If the existing O-ring is not seated in the open end of the boom valve body, install it now. 7. Install the male to male adapter that you removed in step 4. 8. Insert the threaded rods through the holes in the valve bodies of the boom bypass valves, and for the 2 rods closest to the mounting rail, through the left-hand mount bracket (Figure 4 and Figure 6). 11. Position the right-hand mount bracket in place. 12.
PAGE 6
2 5 3 4 Installing the Supply Hose 1 Parts needed for this procedure: 1 Hose 2 Hose clamp Procedure 1. Slide a hose clamp over the open end of the hose and install the hose over the exposed barb in the manual valve. G014223 Figure 8 1. Bolt (3) 3. Locknut (3) 2. Mount bracket 4. Control box and bracket 1 3. Locate the red (pressure gauge) tube coming from the back of the control box and install it to the opening in the tee fitting (Figure 9). 2 3 1 4 G021563 Figure 10 2 3 1.
PAGE 7
6 Connecting the Spray Hose Parts needed for this procedure: 1 Long hose with fitting 1 Spray gun 1 Hose clamp, small Procedure 1. Connect the free end of the long hose to the fitting on the spray gun (Figure 11). Figure 12 4. Connect the negative battery wire to the battery. 7 1 G019523 Installing the Electrical Harness Figure 11 1. Spray gun 2. Secure the end of the hose with a small hose clamp. No Parts Required 3.
PAGE 8
Switching from Boom Spray Mode to Hand Spray Mode Operation WARNING 1. Stop the machine and set the parking brake. Fluid under pressure can penetrate skin and cause injury. WARNING • Do not aim the sprayer at any person or animal. Driving while using the hand sprayer can cause loss of control, resulting in injury or death. Do not operate the hand sprayer while driving.
PAGE 9
Spraying with the Hand Sprayer Switching from Hand Spray Mode to Boom Spray Mode 1. Remove the desired amount of hose from hose hooks. 1. Press the rate control switch to reduce the pressure. 2. Set the spray selection switch to the off position. Important: Do not pull the hose with the spray gun. Always hold the hose and pull on it directly. Pulling on the hose with the gun may break the fitting on the gun or damage the hose. 2. Release the trigger lock. 3.
PAGE 10
Notes: 10
PAGE 11
Notes: 11
PAGE 12