Installation Instructions

7.Repeatsteps4through6attheforwarddrill
mark(Figure19).
g206494
Figure19
1.Drillmark(forwardofthe
lid)
2.Hole-sawbit—4.5cm
(1-3/4inch)
AssemblingtheRinseNozzles
Ownerprovidedmaterial:PTFEsealant
1.Assembletherinsevaneandbushingoverthe
shoulderbolt(Figure20).
g207947
Figure20
1.Gasket
4.Bushing
2.Bulkheadtting
5.Rinsevane
3.Rinsenozzle
6.Shoulderbolt
2.Assembletherinsevane,bushing,andshoulder
boltontotherinsenozzle(Figure20).
3.ApplyPTFEthreadsealanttothethreadsofthe
rinse-nozzle.
4.Installtherinse-nozzleassemblyintothe
bulkheadttingandtightenbyhand(Figure20).
5.Assemblethegasketoverthebulkheadtting
(Figure20).
6.Repeatsteps1through4fortheotherrinse
nozzle.
10