Installation Instructions

5
InstallingtheRinse-Tank
Pump
Partsneededforthisprocedure:
1Rinse-tankpump
4
Bolt(1/4x1-3/4inches)
4
Washer(1/4inch)
4
Serrated-angenut(1/4inch)
1Pumpcover
AssemblingthePumptothe
Machine
Ownerprovidedmaterial:PTFEsealant
1.Aligntheholesinthemounting-angespacers
oftherinse-tankpumpwiththeholesinthe
saddleplateofthetankframe(Figure24).
g206594
g219470
Figure24
1.Washer(1/4inch)4.Serrated-angenut(1/4
inch)
2.Bolt(1/4x1-3/4inches)5.Saddleplate(tankframe)
3.Mounting-ange
(rinse-tankpump)
2.Assembletherinse-tankpumptothesaddle
plate(Figure24)with4bolts(1/4x1-3/4inches),
4washers(1/4inch),and4serrated-angenuts
(1/4inch).
3.Torquetheboltsandangenutto1017to1234
N∙cm(90to101in-lb).
4.Removethedustplugfromthe2-socket
electricalconnectorofthemachineharness
labeledRINSEPUMP(Figure25).
12