Installation Instructions

3.Assemblethehoses—1.9x180cm(3/4x71
inches)andahoseclampontotheT-ttingas
showninFigure27.
4.Tightenthe3hoseclampsthatsecurethe3
hosestotheT-ttingbyhand.
AssemblingtheFittingstothe
Rinse-TankPump
Ownerprovidedmaterial:PTFEthreadsealant
1.ApplyPTFEsealanttothethreadsofthe2
Straight-barbtting.
2.Installthe2straight-barbttingintothe2ports
oftherinse-tankpump(Figure28).
Note:Movethepumpcoverasneededto
provideaccesstotheportsoftherinse-tank
pump.
g220001
Figure28
1.Straight-barbtting3.Leftsideofthemachine
2.Port(rinse-tankpump)4.Rightsideofthemachine
InstallingtheHosesandFilter
1.Assemblethehose—53.3cm(21inches)at
thebottomoftherinsetankontotheinboard
straight-barbttingoftherinse-tankpumpwith
ahoseclamp,andtightentheclampbyhand
(Figure27).
g219999
Figure29
1.Hoseclamp3.Rinsetank
2.Straight-barbtting
(inboard—rinse-tank
pump)
4.Hose—53.3cm(21
inches)
2.Assemblethehose—20.3cm(8inches)that
youcutinCuttingtheHose(page5)ontothe
outboardstraight-barbttingoftherinse-tank
pumpwithahoseclamp,andtightentheclamp
byhand(Figure30).
14