Installation Instructions

Operation
OperatingtheRinseKit
UsingtheRinseKitwillresultinarinsate(adiluted
solutionofresidualchemicals).Inmanycases,it
isappropriatetoapplytherinsateontoatreated
area(s).However,beforedoingso,checkwiththe
chemicalmanufacturertoensurethattheapplication
ofadilutedsolutiontothetreatedarea(s)doesnot
adverselyaffecttheperformanceoftheproduct.
Important:TheRinseKitisnotintendedto
dislodgeclumpedmassesofwetablepowder
orwater-solublechemicalsthatoccurwhen
chemicalsarenotproperlyintroducedintothe
maintank.
Controls
TheRinseKitiscontrolledbya3-positionswitch
(Figure40orFigure41).
•Therinse-tankpumpisonwithtimedrinsewhen
youpressthe3-positionswitchuppositionandit
locks—thedelaytimerrunsthepump.
Note:For2015andbeforemachines,theswitch
illuminates.
•Therinse-tankpumpisoffwhenyoupressthe
3-positionswitchtothemiddleposition.
•Therinse-tankpumpisonmomentarily:whenyou
pressandholdthe3-positionswitchinthedown
positiontorunthepump—thedelaytimerdoes
runthepump.
Note:For2015andbeforemachines,theswitch
illuminates.
g034586
Figure40
2015ModelsandBefore
1.ON(up)position—timed
rinse(theswitch
illuminates)
3.ON(down)
position—momentary
rinse(theswitch
illuminates)
2.OFF(middle)position
g034587
Figure41
2016ModelsandAfter
1.ON(up)position—timed
rinse
3.ON(down)
position—momentary
rinse
2.OFF(middle)position
DescriptionofOperation
Operatingthe3-PositionSwitchforaTimed
Rinse
Pressingupthe3-positionswitchstartsatimed
rinse.Thepumprunsfor110secondsanditpumps
approximately1/3oftherinsetankcontentsintothe
maintank.Duringthistimetheswitchstaysinthe
upposition.
20