Installation Instructions

AssemblingtheRinseTank
1.Installthebulkheadttingintotheholeatthe
bottomoftherinsetankasfollows:
A.Installacleargasketontothebulkhead
ttingasshowninFigure5.
g206390
Figure5
1.Bulkheadtting
4.Wire—approximately122
cm(48inches)
2.Cleargasket5.Neck(rinsetank)
3.Retaining-forkhole
(bulkheadtting)
B.Attachapieceofwire,approximately122
cm(48inches)inlength,through1ofthe
retaining-forkholesinthebulkheadtting
asshowninFigure5.
g014228
Figure6
1.Rinsetank
4.Filleropeningoftherinse
tank
2.Tankcap5.Wire
3.Bulkheadtting6.Bottomholeoftherinse
tank
C.Ifthecapisinstalled,removeitfromthe
rinsetank.(Figure6).
D.Lowerthewirethroughtheopeninginthe
tankllholeandrouteitthroughtheopen
holeatthebottomofthetank(Figure5and
Figure6).
E.Usethewiretoguidethebulkheadtting
totheopenholeatthebottomofthetank
(Figure7).
g014229
Figure7
1.Bulkheadttingwiththe
wireattached
3.Fillercap
2.Bottomholeoftherinse
tank
F.Movethebulkheadttingintoposition
makingsurethatthecleargasketseats
againsttheinteriorwalloftherinsetank
(Figure7).
2.Securethebulkheadttingtotherinsetankwith
aplasticange-nut(Figure8).
g014230
Figure8
1.Rinse-tanksump
3.Plasticangenut
2.Bulkheadtting(installed)
3.Installa90°ttingtothebulkheadtting,and
securethe90°ttingwitharetainingfork(Figure
9).
6