Installation Instructions

4
InstallingtheRinseNozzles
Partsneededforthisprocedure:
2Rinsenozzle
2
Bulkheadtting
1
Gasket
2
Shoulderbolt
2Bushing
2Rinsevane
2
Plasticangenut
2
90°tting
DrillingtheSprayTank
1.Openthetanklidandremovethestrainerbasket
(Figure16).
g206491
Figure16
2.Locatethe2drillmarksinthemaintank(Figure
17).
Note:Thedrillmarksaredimplesmoldedinto
thetank.
g206492
Figure17
1.Drillmarks
3.Movetothedrillmarkbehindthetanklid.
Note:Placeacontainerinsidethetankbelow
theareaswhereyouaredrillingtocatchfalling
debris.
Important:Debrisleftinsideatankcould
cloganddamagethespraysystemduring
operation.
4.Useaholesawtomakeahole—4.5cm(1-3/4
inches)atthedrillmark(Figure18).
g206493
Figure18
1.Drillmark(behindthelid)
2.Hole-sawbit—4.5cm
(1-3/4inch)
5.Removeanyroughedgescutinthetank.
6.Cleananydebristhatenteredthemaintank.
9