Operator's Manual

7
Specifications
Note: Specifications and design subject to change without notice.
General Specifications
Engine
Kawasaki, 6 hp (4.5 kW), 180 cc, dual–element air cleaner. 1 gallon (3.8 l) fuel
tank.
Transaxle 3–speed gear–drive with neutral and reverse.
Wheels
Front: 10 x 3.5” (25.4 x 8.9 cm), pneumatic: Rear: 13.5 x 5” @34.3 x 12.7 cm),
pneumatic. Pressure: 12–15 psi rear tires and 18–20 psi in front castor wheel.
Frame Welded sheet steel and tube construction, integral trailer tie–downs.
Controls/Gauges
On/off ignition key switch, 3–speed transaxle shift lever with neutral and reverse,
traction drive lever. spray on/off lever, flush/paint lever, parking brake lever, caster
unlock lever.
Walking Speeds
1st gear: 1 mph (1.6 km/h); 2nd gear: 2.2 mph (3.5 km/h); 3rd gear, transport: 4
mph (6.4 km/h); Reverse: 1 mph (1.6 km/h).
Ground Pressure Less than 15 psi (1.0 bar).
Flush System Express Clean System.
Pump
Belt–driven five chamber diaphragm with welded diaphragm reinforcing shield.
Flow: 4.5 gpm (I7 liters/min) free–flow, 4 gpm (15 liters/min) @ 30 psi (2.1 bar).
Operating pressure range: 20–40 psi (1.4–2.8 bar), 55 psi (3.8 bar) full bypass.
Excess spray flow returns to tank for paint agitation.
Nozzle Double fan pattern, 2–6” (5.1–15.2 cm) wide.
Paint Pre–Mix Dilute with water to suit the application.
Fresh Water Rinse
On board system, tank capacity: 2 gallons (7.6 liters). Capable of 4 rinse cycles per
fill/tank.
Paint Tank
Roto–molded polyethylene construction, 12 gallon (45 liter) Capacity, 18 mesh
strainer basket, drain valve located high enough to discharge into a standard 5
gallon (19 l) pail.
Attachments/Accessories On–board storage container, selection of spray nozzles.