Service Manual

Disassembly (Fig. 3)
1. Park machine on a level surface, stop engine, apply
parking brake and remove key from the ignition switch.
Remove high tension lead from the spark plug and posi-
tion the lead away from the spark plug.
2. Disassemble shift linkage components as needed
using Figure 3 as a guide.
Assembly (Fig. 3)
1. Assemble shift linkage components using Figure 3
as a guide.
2. After assembly of shift linkage components, make
sure that console shift lever movement allows correct
transaxle shifting. If necessary
, adjust rod fitting (item
15) location on control rod for proper shifting.
3. Secure high tension lead to spark plug.
Line Painter 1200 Page 7 – 5 T
raction Drive System
System
Traction Drive