Specifications

25
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
GROUNDSMASTER 4300-D, TIER 4 DIESEL, MODEL 30864 (A)
ENGINE
Yanmar
®
3-cylinder, 88.5 ft.-lbs. of torque, liquid-cooled, turbo-charged diesel, 43.4 hp (32.4 kW) 91.4 cu. in. (1.5 liter) displacement. 5.5 quart (4.7 liter) oil capacity.
EPA Tier IV Final Compliant.
AIR CLEANER
Dry, replaceable primary and optional safety element.
RADIATOR
Rear-mount, cross flow, 7-row, 6.3 fins per inch, 5.5 quart (5.2 liter) capacity.
FUEL CAPACITY
13.5 gallons (51.1 liters) diesel fuel. Biodiesel-ready for use up to B20 (20% biodiesel 80% diesel blend).
TRACTION DRIVE
Front drive wheels powered by a hydrostatic pump with individual wheel motors. Parallel - Series Hydrostatic, closed loop 4 wheel drive, forward direction only.
Variable displacement piston pump with direct displacement control, Standard all-wheel drive with CrossTrax
®
All-Wheel Drive system, which transfers power from the
front wheels to the opposite rear wheels via independent rear wheel motors.
HYDRAULICS/COOLING
14 gallon (53 liter) capacity with two remote spin-on filters; main system, and traction charge, Oil cooler is a double row single pass (11 fin/in) that tilts out for cleaning.
DIAGNOSTICS
Diagnostics pressure test ports: forward and reverse traction, deck circuit 1 & 2, change 4WD, and lift.
GROUND SPEED
Transport: 0-10 mph (0-16.7 km/h) forward, 0-3.5 mph (0-5.6 km/h) reverse.
Mow: 0-7 mph (0-11.3 km/h) forward, 0-3.5 mph (0-5.6 km/h) reverse.
TIRES
Front: 26.5 x 14-12, 6-ply turf tread. Rear: 20 x 12-10, 6-ply turf tread.
MAIN FRAME
All welded formed-steel frame with integral tie-down anchors.
BRAKES
8”mechanical drum-type front wheel brakes. Brakes may be actuated for service braking via left foot pedal. Integrated foot pedal lock provides parking brake.
Dynamic braking through hydrostatic traction drive system.
SEAT
Mechanical suspension seat standard with pivoting LH armrest, pivoting RH control arm and retractable seat belt, Air-Ride seat suspension optional.
STEERING
Rear wheel, power steering with an independent hydraulic pump circuit.
INSTRUMENTATION
InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics. Indicates fuel level, coolant temp, low oil pressure,
alternator, engine hours, engine rpm, voltage, counterbalance settings, glow indicator, lift/lower indicator.
CONTROLS
Ignition switch, foot-operated traction pedal, engine speed control, mow/transport selector switch, service brake with parking brake latch, joystick control for raising
and lowering cutting units, mow/transport lever.
ELECTRICAL
12-volt battery with 540 cold cranking amps, 55 amp alternator. Overload protection with automotive-type fuses.
INTERLOCKS
Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, decks stop. If operator leaves the
seat with the unit out of neutral, engine stops. Mowing only permitted in low range. Engine stops if parking brake engaged and traction pedal not in neutral.
OPERATOR AREA
Beverage holder, radio holder / mobile phone holder, 12-volt power outlet, open compartment for tools, jackets, golf balls, etc. under control arm.
WORK LIGHTS
Standard.
ROLL-OVER PROTECTION
2-post standard.
DIMENSIONS
W/ CUTTING UNITS
& WEIGHT
Overall length w/decks down: 126” (320 cm) Traction Unit Weight: 3,205 lbs (1454 kg) - with full fluids and 5 cutting units.
Overall width: 96.3” (245 cm) (outside of decks) Cutting Unit Weight: 140 lbs (64 kg) – single cutting unit assembly only.
Overall transport width: 88.3” (224 cm) (outside of front tires)
Height w/2-post ROPS: 86” (215 cm)
Wheelbase: 60” (152.4 cm)
Track Width, front/rear: 88.3” (224 cm)/54” (137 cm)
Ground clearance: 5” (12.7 cm)
SAFETY
Complies with American National Standards Institute (ANSI B71.4-2004) and applicable ISO EN 5395 (CE) standards (machine directive 89/392, 91/368, 93/44, 84/538,
89/336) requirements.
WARRANTY
Two-year limited.
ACCESSORIES
Air ride seat suspension (03667), leaf mulching kit (108-7409-01), combination blade (108-7395-03), angle sail blade (117-0209-03) atomic mulching blade (114-
0435), parallel sail blade (114-0434-03), white sunshade (30349), red sunshade (30552), rear roller scraper kit,(117-0149), operator fan kit (110-8804), 22” rotary
replacement cutting unit (30845), diagnostic display box (85-4750).
CUTTING UNITS
TYPE
Five Contour™ Plus 22” (55.9 cm), rear-discharge rotary cutting units w/rear rollers.
WIDTH OF CUT
90” (229 cm), overlap 5” (12.7 cm), overhang 1” (2.5 cm).
HEIGHT OF CUT
.75”-4” (1.9-10.2 cm) in .25” (.6 cm) increments.
DECK DRIVE
Hydraulic, direct coupled to spindle
CONSTRUCTION
Cutting chamber is 10-gauge steel constructed chambers with 12-gauge welded reinforcements. Spindle support is 3/16” (.48 cm) high-strength steel and 10-gauge
exterior channels. Cutting unit frame is welded 1.5” (3.8 cm) square x .25” (.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16” (.48 cm) high-strength
steel and 10-gauge exterior channels.
SPINDLE ASSEMBLY
Ductile cast iron spindle housing. Dual greaseable tapered roller bearings. 1.25” (3.2 cm) diameter solid cold finished steel spindle shaft. Splined connection between
spindle shaft and pulley. Welded blade retainer plus anti-scalp cups.
GROUND FOLLOWING
6” (15.3 cm) anti-scalp cups on each blade. On each deck: two 5” (12.7 cm) diameter front rollers with sealed stainless steel bearings, one 3” (7.6 cm) diameter rear
roller with greaseable stainless steel bearings.
BLADES
22” (55.9 cm) long, 2.5” (6.4 cm) wide, .25” (.64 cm) thick. Standard: combo blade (108-7395-03)
Groundsmaster
®
4300-D Specifications
*
The Groundsmaster 4300-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes
only. Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details
on all warranties.
**Dependent on operator and turf conditions.