Operator's Manual

• Performing maintenance on machine not properly

supported with jack stands may cause machine to fall

and could cause injury.

• Do not over speed the engine by changing the governor

settings. Maximum engine rpm with no load is 3000

rpm. To ensure safety and accuracy, have an Authorized

TORO Distributor check maximum engine speed with a

tachometer.

• Engine must be shut off before checking oil or adding

oil to the crankcase.

• If wheel is removed for maintenance or repairs on the

wheel, brake, or hydraulic wheel motor, when

remounting wheel ALWAYS ensure that the wheel

motor axle nut is torqued to 200–400 ft.–lb.

• To be sure of optimum performance and safety, always

purchase genuine TORO replacement parts and

accessories. Replacement parts and accessories made by

other manufacturers could be dangerous. Altering this

machine in any manner may affect the machine’s

operation, performance, or durability, or its use may

result in injury or death. Such use could void product

warranty of The Toro Company.

• NEVER attempt to service the gas springs located on

hopper and hopper door. These springs are under high

loads and improper handling ran result in bodily harm.

Special tools are required to replace worn or damaged

gas springs; contact an Authorized TORO Distributor.