Installation Instructions

4
18. Mount new spacer brackets to front of R.H. and L.H.
bed frame channels with three capscrews and 3/8 inch
locknuts. Position brackets on channel as shown in
Figure 11.
2/3 Bed Only
1
Figure 11
1. Spacer bracket
19. Remove capscrews and locknuts securing each set of
rear pivot plates and pivot tube to right and left bed
frame channels (Fig. 12).
Full Bed Shown
1
2
Figure 12
1. Left rear corner of bed 2. Pivot bracket
20. Loosely mount each set of new rear pivot plates to right
and left bed frame channels with three 3/8 x 3-3/4 inch
large capscrews and locknuts (Fig. 13). Position
brackets rearward on full bed as shown in Figure 13,
and forward on 2/3 bed as shown in Figure 14.
Full Bed Shown
1
2
Figure 13
1. Left rear corner of bed 2. Pivot bracket
2/3 Bed Shown
1
2
Figure 14
1. Left rear corner of bed 2. Pivot bracket
21. Install bed to vehicle by reversing step 1. Rear of bed is
now secured to rear of hitch assembly (Fig. 15).
Full Bed Shown
Figure 15