Service Manual

Topdresser 1800 & 2500

Page 1 – 4

Safety

Jacking Instructions (Topdresser 2500)

CAUTION

When changing tires or performing other ser-

vice, use correct hoists or jacks to support the

Topdresser. Make sure machine is parked on a

solid level surface such as a concrete floor. Al-

ways chock or block wheels. Use appropriate

jack stands to support the raised machine. If the

machine is not properly supported, the ma-

chine may move or fall, which may result in per-

sonal injury.

1. Position Topdresser on a level surface with hopper

empty. Have Topdresser attached to towing vehicle, en-

gage vehicle parking brake, stop engine and remove

key from the ignition switch. Chock Topdresser wheels

to prevent it from moving.

2. Position jack securely under the skids (Fig. 1). Do

not use the axle as a jacking point.

3. Carefully jack machine off the ground.

4. Position jack stands under the skids to support the

Topdresser.

1. Skid

Figure 1