Service Manual

Topdresser 1800 & 2500 Page 5 – 13 Chassis
Wheel Removal (Fig. 10)
1. Position Topdresser on a level surface with hopper
empty. Have Topdresser attached to towing vehicle, en-
gage vehicle parking brake, stop engine and remove
key from the ignition switch. Chock Topdresser wheels
to prevent it from moving.
2. Jack or hoist sweeper from ground and support ma-
chine with blocking or jack stands (see Operator’s
Manual and Jacking Instructions in Chapter 1 – Safety).
3. Loosen and remove five (5) lug bolts from wheel to
be removed.
4. Pull wheel from machine.
Wheel Installation (Fig. 10)
1. Position wheel to wheel hub on cradle. Make sure
that the valve stem is facing out (away from wheel hub).
2. Secure wheel to sweeper with five (5) lug bolts.
3. Lower machine to ground.
WARNING
Failure to maintain proper lug bolt torque
could result in failure or loss of wheel and may
result in personal injury.
4. Alternately torque bolts from 70 to 90 ft–lb (95 to
122 N–m).
Chassis