Operator's Manual

3.Rotatemotorsprocketassembly(Figure16)until
thewheel-drivechaindeects3.2mm(1/8inch).
Note:Accesstochainisthroughcutoutinlower
sideofaxlecradle.
Important:Donotovertensionthe
chainoritwillwearprematurely.Donot
under-tensionthechainoritwillcause
sprocketwear.
4.Tightenmountingbolts.
Note:Wedonotrecommendlubricatingthe
drivechainsunlesstheybecomestifffrom
rust.Ifthechainrusts,lightlylubricateitwitha
dry-typelubricant.Thisreducesthelikelihood
ofsandbuild-uporothertop-dressingmaterial
adheringtothechain.
Tensioningthe
Conveyor-BeltChain
1.PerformthestepsinPreparingforMaintenance
(page19).
2.Removethechaincover(Figure17).
g012659
Figure17
1.Chaincover
3.Loosenboltsandnutsthatsecurethemotorand
sprocketassemblytothemainframe(Figure
18).
4.Rotatemotorandsprocketassembly(Figure18)
inmountingslotsuntiltheconveyer-beltchain
deects3.2mm(1/8inch).
Important:Donotovertensionthe
chainoritwillwearprematurely.Donot
under-tensionthechainoritwillcause
sprocketwear.
g012660
Figure18
1.Conveyer-beltchain
2.Motorandsprocket
assembly
5.Tightenmountingbolts(Figure18).
6.Installchaincover(Figure17).
22