Operator's Manual

AssemblingtheSliderBed
1.Attheleftsideofmachine,assemblethe
slider-framerailtotheleftfender(Figure29)
withthe2capscrewsand2washersthatyou
removedinDisassemblingtheSliderBed(page
24),andtightenthecapscrews.
g012671
Figure29
1.Liftingrod2.Capscrews(slider-frame
rail)
2.Attherightsideofmachine,tighten2capscrews
thatsecureslider-framerailtotherightfender
(Figure30).
g012670
Figure30
1.Capscrews(slider-framerail)
3.Carefullyrotatethehopperdownontothe
slider-framerails;refertoFigure26of
DisassemblingtheSliderBed(page24)
4.Ateachsideofmachine,securethehopper
toslider-framerails(Figure31)withthe2
capscrews,2washers,and2locknutsthatyou
removedinDisassemblingtheSliderBed(page
24).
g012668
Figure31
Rightsideshown
1.Capscrews(hoppermounting)
5.Tensiontheconveyerbelt;refertoT ensioning
theConveyorBelt(page23)
InstallingtheConveyerChain
1.Assemblethechainontothesmallsprocketand
securethechainwiththemasterlink(Figure32).
g012666
Figure32
1.Drivechain3.Motor
2.Masterlink
2.Ifyouloosenthemotor-mountbolts,tension
theconveyer-beltchain,refertoTensioningthe
Conveyor-BeltChain(page22)
3.Installthechaincover(Figure33).
26