Operator's Manual

Troubleshooting
Problem
PossibleCauseCorrectiveAction
1.Thetractionunithasthewrong
connector.
1.Purchaseanadditionalharnessfrom
yourauthorizedT orodistributor.
Difcultyinconnectingordisconnecting
controlwires
2.Theon/offconnectionsareswitched
withbrakewiring.
2.Correctconnections.
1.Thewheelmotors/pumpsarenot
turning.
1.Thehydraulicplumbingisreversed.
2.Thebrakesolenoidisactivated.
2.Checkthewiring.
Topdresserishardtopullwithtractionunit
3.Thehydraulicoilishot.
3.Correctthecondition.
1.Thettingsareloose.1.Tightenthettings.
2.Theoillterisloose.2.Tightentheoillter.
3.AttingismissinganO-ring.3.InstallthemissingO-ring.
Hydraulicleaks
4.Thehydraulicuidreservoiroverlled.4.Removesomehydraulicuidfromthe
reservoir.
1.Thesolenoidwiringisnotproviding12
volts.
1.Checkthefuseandelectrical
connections.
2.Thehandcontrolhandleswitchisworn
ordamaged.
2.Checkforcontinuitythroughtheswitch
andcheckdiodeinelectricalsolenoid
connector.
3.Thehydraulicmotors/pumpsarenot
turning.
3.Checkthewheel-drivechain.
Beltand/orbrushdoesnotfunction
4.Theconveyerbeltslips.
4.Checktheconveyerbelttension.
1.Therollersdonothaveequalcenter
distance.
1.Adjustthesidetosidedistance.
2.Thebelttensionisincorrect.2.Makesurethatthespringsare
compressedequallyateachsideof
themachine.
3.Thebearinglockcollarssecuringroller
arenottight.
3.Tightenthebearinglockcollars.
Belttracking
4.Thebeltribisnotalignedthegroove
inrollers.
4.Alignthebeltribwiththegroovein
rollers.
32