Operator's Manual

TROUBLE SHOOTING

A. Difficulty in connecting or disconnecting control wires:

 Wrong connector on tow vehicle. An additional harness may be acquired from your distributor.

 On/off connections switched with brake wiring.

B. Topdresser hard to pull with tow vehicle:

 Wheel motors (pumps) not turning.

 Plumbing reversed.

 Brake solenoid activated (check wiring).

 Hydraulic oil hot.

C. Hydraulic leaks:

 Fittings loose.

 Oil filter loose.

 Fitting missing o-ring.

 Reservoir over filled.

D. Belt and/or brush does not function:

 Solenoid wiring not providing 12 volts - Check fuse and connections

 Control handle toggle switch malfunction - Check for continuity and check diode in electrical solenoid

connector.

 Hydraulic motors (pumps) not turning, check chain drive.

 Belt Slipping-Check tension

E. Belt tracking:

 Check rollers for even center distance (side to side)

 Check belt tension (spring compressed equally on each side)

 Bearing lock collars securing roller not tight.

 Belt guide groove not aligned with roller