Operator's Manual

g012669
Figure27
4.Attherightsideofmachine,loosen2capscrews
thatsecureslider-framerailtotherightfender
(Figure28).Ensurethatthecapscrewsare
looseenoughtoallowsliderbedtip.
g012670
Figure28
1.Capscrews(slider-framerail)
5.Attheleftsideofmachine,remove2capscrews
and2washersthatsecureslider-framerailto
theleftfender(Figure29).
g012671
Figure29
1.Liftingrod2.Capscrews(slider-frame
rail)
RemovingtheBelt
Cutbeltandremoveitfromrollers.
InstallingtheBelt
1.Insertaliftbarthoughtheholeattheleft
slider-framerail,andraisetheliftbartotipframe
railslightly;refertoFigure29inDisassembling
theSliderBed(page24).
2.Assemblethebeltovertheliftbarandrollers
asfaraspossible.
3.Insertaplasticbelttoolbetweeneachrollerand
thebelt.
Rotaterollersuntileachtoolispositionedtothe
outsideofeachroller.Insertthetoolpastribin
thecenterofbelt.
4.Slidebeltandbelttoolsfurtherontorollersuntil
beltiscenteredonrollers.
5.Removebelttools.
6.Alignbeltsothatthebeltribtsintoalignment
groovesineachroller.
25