Operator's Manual

AssemblingtheSliderBed
1.Attheleftsideofmachine,assemblethe
slider-framerailtotheleftfender(Figure30)
withthe2capscrewsand2washersthatyou
removedinDisassemblingtheSliderBed(page
24),andtightenthecapscrews.
g012671
Figure30
1.Liftingrod2.Capscrews(slider-frame
rail)
2.Attherightsideofmachine,tighten2capscrews
thatsecureslider-framerailtotherightfender
(Figure31).
g012670
Figure31
1.Capscrews(slider-framerail)
3.Carefullyrotatethehopperdownontothe
slider-framerails;refertoFigure27of
DisassemblingtheSliderBed(page24).
4.Ateachsideofmachine,securethehopper
toslider-framerails(Figure32)withthe2
capscrews,2washers,and2locknutsthatyou
removedinDisassemblingtheSliderBed(page
24).
g012668
Figure32
Rightsideshown
1.Capscrews(hoppermounting)
5.Tensiontheconveyerbelt;refertoT ensioning
theConveyorBelt(page23).
InstallingtheConveyerChain
1.Assemblethechainontothesmallsprocketand
securethechainwiththemasterlink(Figure33).
g012666
Figure33
1.Drivechain3.Motor
2.Masterlink
2.Ifyouloosenthemotor-mountbolts,tension
theconveyer-beltchain,refertoTensioningthe
Conveyor-BeltChain(page22).
3.Installthechaincover(Figure34).
26