Operator's Manual

12
Maintenance
Note: Determine the left and right sides of the machine
from the normal operating position.
Greasing the Blower
Fan Shaft Bearings
The (2) fan shaft bearings (Fig. 11) must be lubricated after
every 8 hours of operation with a No. 2 Lithium-based
grease.
Figure 11
Castor Wheels
Under normal conditions, grease the (2) castor wheel pivot
tubes (Fig. 12) after every 50 hours of use. Use a No. 2
Lithium-based grease.
Figure 12
Drive Shaft
Under normal conditions, grease the (2) drive shaft fittings
after every 100 hours of use (Fig. 13). Use a No. 2
Lithium-based grease.
Figure 13