Operator's Manual

14
Troubleshooting
Problem Possible Causes Corrective Action
There is excessive vibration.
1. The bearing(s) on the fan shaft
is damaged.
1. Replace the bearings.
2. Material is built up on the fan
blades.
2. Clean out any build up on the
inside of the housing.
3. The RPM of the PTO shaft is
too fast.
3. Reduce the PTO speed to
540 RPM.
There is lack of adequate air flow.
1. The air slots are clogged with
debris.
1. Clean out any debris from the
slots.
2. The RPM on the tractor is too
slow.
2. Increase the PTO speed to
540 RPM.
3. The throttle on the tractor
engine is too blow.
3. Make any necessary repairs to
bring the tractor speed up to
normal.