Operator's Manual

6
Specifications
General Specifications
Fan Output
5900 CFM + 200 CFM
145 MPH + 20 MPH
Fan Speed 1840 RPM + 20 RPM @ 540 PTO Input
Outlet Area 70 square inches
Directional Control
Deflector chute for 180 degree diversion as standard Spring compensated lever control just
behind 3–point hitch
Caster Wheels Two 13 x 5.00–6 pneumatic rubber tires
Height Adjustment 0 – 1–1/2 by 1/2 in. increments
Turf Protection
16 inch long 4 inch diameter turf roller behind fan housing. Beveled skid plate under fan
housing to prevent damage from high centering. Floating directional deflector chute.
Ground Clearance Determined by turf tractor 3–point hitch and caster wheels
Fan
.250 HRPO plate
Radial design with 8 blades
Outer diameter 24 inches + .5 inch
Width 6 1/2 inches + 1–1/4 inch
Weight 45 lbs. + 2 lbs.
Fan Housing
Split house – upper housing and lower housing
Upper housing – 12 ga. HRPO front and rear plates flanged at separation seam with 12 ga.
HRPO rolled and flanged blower band with increasing radius from cutoff point
Lower housing – 10 ga. HRPO front and rear plates flanged at separation seam with 12 ga.
HRPO roller and flanged blower band with increasing radius to exhaust
Inside housing clearance 7 inches + 1–1/4 inch
Drive
Belt drive 4–3VX
Power source: 25 PTO HP +1–3 HP turf tractor with 3–point hitch and 540 PTO
Drive ratio: .293:1
Love joy torsion type belt tightener
Mounting:
Category one, three–point hitch on any tractor in the 25 PTO HP range with a three–point
hitch and 540 PTO
Weight: 475 lbs.
Note: Specifications and design subject to change without notice.
Optional Equipment
Drive Line CE Kit Part No. 105–0710