Installation Instructions

1 67-005-0152 Mounting Frame 1
2 67-005-0141 Mounting Pin 2
3 67-004-1161 Lower Mounting Pin 1
4 01-282-0600 PTO Assembly 1
5 67-005-0241 Belt Guard 1
6 67-005-2151 Pulley Shaft 1
7 67-005-0251 Bearing Mount 1
* 67-002-0051 Bearing Mount Assembly
(Incl. Ref. #6,7,13,17,38,39) 1
8 67-005-0131 Lower Support Arm 1
9 67-005-0121 Upper Support Arm 1
10 67-004-1371 Upper Support Arm Brace 1
11 321-6 Capscrew - Hex Hd. 2
12 67-004-0401 Upper Support Hinge Rod 1
13 3253-3 Lock Washer 3
14 01-264-0350 Belt 1
15 01-260-0060 Sheave 1
16 01-260-0150 Sheave 1
17 3256-2 Flat Washer 5
18 01-159-0010 Presto Pin 4
19 01-650-0110 All Thread 1
20 3217-9 Hex Nut 4
21 3253-7 Lock Washer 2
22 3256-6 Flat Washer 1
23 82-004-1171 Key 3
24 3296-39 Lock Nut 1
25 325-6 Capscrew - Hex Hd. 1
26 01-506-0040 Decal - Danger 1
27 01-260-0240 Bushing 2
28 01-163-0030 Socket Head Set Screw 1
29 323-13 Capscrew - Hex Hd. 1
30 3217-7 Hex Nut 6
31 3256-4 Flat Washer 3
32 3272-11 Cotter Pin 2
33 3217-5 Hex Nut 2
34 01-506-0130 Decal - Danger 1
35 323-8 Capscrew - Hex Hd. 2
36 3253-5 Lock Washer 2
37 01-506-0550 Decal - Grease 1
38 01-100-0340 Bearing (see note) 1
39 321-4 Capscrew - Hex Hd. 1
67-002
©
The TORO Company - 1994
All Rights Reserved
PARTS LIST &
ASSEMBLY
INSTRUCTIONS
MODEL NO. 44527
67 BLOWER MOUNTING KIT
for 200 SERIES GROUNDSMASTER
®
(Prior ’89)
FORM NO. 01-502-1300.1
Note: When installing bearing,
apply #609 Loctite to bearing be-
fore pressing into collar.
Ref.
No.
Part No.
Description
No.
Used
Ref.
No.
Part No.
Description
No.
Used
PARTS LIST