Operator's Manual

11
Removing Debris Blower From
Tow Vehicle
1. Park debris blower on a level surface and block wheels.
Before leaving the operator’s seat on the tow
vehicle, wait for the engine and all moving parts to
stop.
Caution
2. Remove jack pin, rotate jack down ward and reconnect
to frame pin.
1
Figure 9
1. Jack
3. Raise debris blower with jack until hair pin cotter and
hitch pin can be removed from hitch.
1
Figure 10
1. Hitch pin
Greasing The Blower
Before the debris blower is operated, it must be greased to
ensure proper lubricating characteristics; Refer to greasing
the blower in the maintenance section; Page 15. Failure to
properly grease the unit will result in premature failure of
critical parts.