Operator's Manual

DANGER
Batteryelectrolytecontainssulfuricacid
whichisadeadlypoisonandcausessevere
burns.
•Donotdrinkelectrolyteandavoidcontact
withskin,eyesorclothing.Wearsafety
glassestoshieldyoureyesandrubber
glovestoprotectyourhands.
•Fillthebatterywherecleanwaterisalways
availableforushingtheskin.
2.Attachthepositivecable(redcable)tothepositive(+)
terminal.
WARNING
CALIFORNIA
Proposition65Warning
Batteryposts,terminals,andrelated
accessoriescontainleadandleadcompounds,
chemicalsknowntotheStateofCalifornia
tocausecancerandreproductiveharm.
Washhandsafterhandling.
3.Attachthenegativecable(blackcable)tothenegative
(-)terminalofthebattery.
4.Coattheterminalsandmountingfastenerswith
petroleumjellytopreventcorrosion.
5.Installthebatterycoverandsecurewiththeclips.
2
MountingtheHitchtothe
DebrisBlower
Partsneededforthisprocedure:
1Debrisblowerassembly
1Hitch
2
Bolt(3/8x3inches)
2
Flangenut(3/8inch)
1Hitchclevis
2
Bolt(5/8x4–1/2inch)
2
Locknut(5/8inch)
Procedure
1.Positionthedebrisbloweronaat,levelsurface.
2.Insertthehitchtubeintotheframebrackets(Figure
4).Securethetubetotheframewith2bolts(3/8x3
inches)andangenuts(3/8inch).
Figure4
1.Framebrackets3.Hitchclevis
2.Hitchtube
Note:Thehitchtubecanberotated180degreesto
accommodatedifferenthitchheights.
3
ConnectingtheDebrisBlower
totheTowVehicle
Partsneededforthisprocedure:
1Hitchpin
1
Clevis
Procedure
1.Backthetowvehicleuptotheblower.
2.Adjusttheblowerhitchclevistothesamelevelastow
vehiclehitchasfollows:
•Setthehitchtubeonajackstandtokeepitparallel
totheground.
•Removetheboltsandlocknutssecuringhitchclevis
(Figure4)tohitchtube.
•Raiseorlowerthehitchclevistotheposition
approximatelylevelwiththetowvehiclehitch.
•Securetheclevistothehitchwiththeboltsand
locknutspreviouslyremoved.Makesuredebris
blowerframeisparallelwiththeground.
3.Adjustthehitchtubelengthtoassuretheblowerdoes
notcontactthetowvehiclewhenturningasfollows:
8