Operator's Manual

1.Draintheoilfromtheengine;refertoChangingthe
EngineOil.
2.Removetheoldlterandwipethelleradapter
gasketsurface(Figure23).
Figure23
1.Oillter
3.Adapter
2.Adaptergasket
3.Applyathincoatofnewoiltotherubbergasketon
thereplacementlter(Figure23).
4.Installthereplacementoilltertothelteradapter,
turntheoillterclockwiseuntiltherubbergasket
contactsthelteradapter,thentightenthelteran
additional2/3to1turn(
Figure23).
5.Fillthecrankcasewiththepropertypeofnewoil;
refertoServicingtheEngineOil.
6.Runtheengineforabout3minutes,stoptheengine,
andcheckforoilleaksaroundtheoillter.
7.Checktheengineoillevelandaddoilifneeded.
AssociateRemoteControland
BaseUnit
Important:Makesuretoreadtheentireprocedure
beforeattemptingtheAssociationprocess.
Theremotecontrolmustestablishcommunicationswith
thebaseunitbeforethesystemcanbeused.Theremote
controlisassociatedtothesystembaseunitbefore
leavingthefactory.ThisisdoneusingtheAssociate
procedure.Insituationswhereitisnecessaryto
re-establishremotecontrol-to-baseunitcommunications
(example:introducinganeworspareremotecontrolto
anexistingbaseunit),thefollowingAssociateprocedure
mustbeperformed.
Note:Associatingtheremotecontroltoadifferent
baseunitwilldisassociatethatremotecontrolfromthe
originalbaseunit.
1.Removepowerfromthebaseunit.
2.Standnearthebaseunitinunobstructed,clear
line-of-sightwiththeremotecontrolinhand.
3.SimultaneouslypressandholdtheAssociateand
Disassociatebuttons.TXlightssteadyGreen.
4.ContinuetoholdbothbuttonsuntiltheLINKLED
beginsashingAmber.
Note:IftheashingLINKLEDgoessolid,the
Associationprocedureisabortedandmustbestarted
anewtoestablishthecommunicationlink.
5.WhentheLINKLEDashesAmber,releasethe
twobuttons.AllthreeLEDsashallowingtwo(2)
secondsfortheoperatortoperformthenextstep.
Note:Ifthenextbuttonpressisnotperformed
withinthetwosecond,theAssociationprocedureis
abortedandmustbestartedanewtoestablishthe
communicationlink.
6.PressandholdtheAssociatebutton.TheRXLED
goesout,theTXLEDlightssteadygreen,andthe
LINKLEDlightssteadyamber.
7.Applypowertothebaseunitwhilecontinuingto
holdtheAssociatebutton.
Theremotecontrolandbaseunitbegintoestablish
acommunicationlinkwhiletheAssociatebutton
isheld.Oncetheprocessiscomplete,theAmber
LINKLEDremainssolid,theRXLEDstops
ashingRedandtheTXLEDlightssteadyGreen
(buttonbeingheld)untilthebuttonisreleased,upon
whichtimeTXbeginsashingGreenindicatingthat
theremotecontrolistransmitting.
8.ReleasetheAssociatebutton.
RXextinguishesandTXashesGreenforabrief
timeandthenittoogoesout.
Thesystemisreadyforusewiththatparticular
remotecontrol.
22