Operator's Manual

Figure20
1.Oildrainvalve2.Oildrainhose(Not
included)
6.Slowlypourapproximately80%ofthespeciedoil
intothellertube(Figure19).
7.Checktheoillevel;refertoCheckingtheEngineOil
Level.
8.SlowlyaddtheadditionaloiltobringittotheFull
mark.
ChangingtheOilFilter
ServiceInterval:Every200hours
Note:Changetheoilltermorefrequentlywhenthe
operatingconditionsareextremelydustyorsandy.
1.Draintheoilfromtheengine;refertoChangingthe
EngineOil.
2.Removetheoldlterandwipethelleradapter
gasketsurface(
Figure21).
Figure21
1.Oillter
3.Adapter
2.Adaptergasket
3.Applyathincoatofnewoiltotherubbergasketon
thereplacementlter(Figure21).
4.Installthereplacementoilltertothelteradapter,
turntheoillterclockwiseuntiltherubbergasket
contactsthelteradapter,thentightenthelteran
additional2/3to1turn(Figure21).
5.Fillthecrankcasewiththepropertypeofnewoil;
refertoServicingtheEngineOil.
6.Runtheengineforabout3minutes,stoptheengine,
andcheckforoilleaksaroundtheoillter.
7.Checktheengineoillevelandaddoilifneeded.
SynchronizetheRemote
Transmitter/ControlModule
Iftheremoteortransmitteriseverreplaced,theremote
willhavetobere-synchronizedwiththereceiver.
1.Locatetheyellowwithblackstripewirewhichis
tuckedintothewireharnesstubingcomingfrom
the6pinconnectoratthereceiver(Figure22).Pull
thewireoutofthetubing.
Figure22
1.Yellowwithblackstripe
wire
3.Enginestartermotor
2.6pinconnector
2.Rotatetheengineignitionkeytothe“START”
positionandquicklyreleaseittothe“ON”position.
Thiswakesupthereceiver.
3.Groundthewiretothechassis.Touchingthewireto
oneoftheenginestartermotormountingfasteners
isagoodground.
4.Whilegroundingthewiretothechassis,pushand
holddownanyofthebuttonsontheremote.
5.Whilestillpressingtheremotebutton,removethe
wirefromtheground.
6.Releasetheremotebutton.
7.Pressoneofthechutedirectionbuttonstoverify
thatthere-synchronizewascompletedsuccessfully.
8.Tuckthewirebackintothetubing.
21