Operator's Manual

2
MountingtheHitchtothe
DebrisBlower
Partsneededforthisprocedure:
1Debrisblowerassembly
1Hitch
2
Bolt(3/8x3inches)
2
Flangenut(3/8inch)
1Hitchclevis
2
Bolt(5/8x4–1/2inch)
2
Locknut(5/8inch)
Procedure
1.Positionthedebrisbloweronaat,levelsurface.
2.Insertthehitchtubeintotheframebrackets(Figure
5).Securethetubetotheframewith2bolts(3/8x3
inches)andangenuts(3/8inch).
Figure5
1.Framebrackets3.Hitchclevis
2.Hitchtube
Note:Thehitchtubecanberotated180degreesto
accommodatedifferenthitchheights.
3
ConnectingtheDebrisBlower
totheTowVehicle
Partsneededforthisprocedure:
1Hitchpin
1
Clevis
Procedure
1.Backthetowvehicleuptotheblower.
2.Adjusttheblowerhitchclevistothesamelevelastow
vehiclehitchasfollows:
•Setthehitchtubeonajackstandtokeepitparallel
totheground.
•Removetheboltsandlocknutssecuringhitchclevis
(Figure5)tohitchtube.
•Raiseorlowerthehitchclevistotheposition
approximatelylevelwiththetowvehiclehitch.
•Securetheclevistothehitchwiththeboltsand
locknutspreviouslyremoved.Makesuredebris
blowerframeisparallelwiththeground.
3.Adjustthehitchtubelengthtoassuretheblowerdoes
notcontactthetowvehiclewhenturningasfollows:
•Removetheboltsandnutssecuringthehitchtube
toframebrackets(
Figure5).
•Securethetubetotheframewiththeboltsand
angenuts.
4.Connecttheblowerclevishitchtothetowvehiclehitch
withthehitchpinandclevis(Figure6).
Figure6
1.Hitchpin
3.Clevis
2.Towvehiclehitch
9