Service Manual
Table Of Contents
- Title Page
- Revision History
- Reader Comments
- Preface
- Table Of Contents
- 1 - Safety
- 2 - Product Records and Maintenance
- 3 - Engine
- Kohler Engine Service Manual
- 4 - Electrical System
- General Information
- Electrical Diagrams
- Special Tools
- Troubleshooting
- Electrical System Quick Checks
- Component Testing
- Ignition Switch
- Hour Meter
- Fuse
- Fusible Link
- Relays
- Remote Transmitter (Machines with Single Channel Controller
- Remote Transmitter (Machines with Multi Channel Controller)
- Wireless Control Module (Machines with Single Channel Controller)
- Wireless Control Module (Machines with Multi Channel Controller)
- Diode Assembly (Serial Number Below 310000000)
- Service and Repairs
- 5 - Blower Assembly
- 6 - Chassis
- 7 - Electrical Diagrams
- Electrical Schematic Model 44538 (S/N Below 310000000)
- Electrical Schematic Models 44538 and 44539 (S/N From 310000000 to 311999999) and Model 44542
- Electrical Schematic Models 44538 and 44539 (S/N Above 312000000)
- Engine Electrical Diagram (S/N Below 310000000)
- Engine Electrical Diagram (S/N Above 310000000)
- Control Module Wake Up
- Crank Circuits
- Run Circuits
- Engine Speed Increase Circuits
- Nozzle Rotation Circuits
- Wire Harness Drawing Model 44538 (S/N Below 310000000)
- Wire Harness Diagram Model 44538 (S/N Below 310000000)
- Wire Harness Drawing Models 44538 and 44539 (S/N 310000000 to 311999999) and Model 44542
- Wire Harness Diagram Models 44538 and 44539 (S/N 310000000 to 311999999) and Model 44542
- Wire Harness Drawing Models 44538 and 44539 (S/N Above 312000000)
- Wire Harness Diagram Models 44538 and 44539 (S/N Above 312000000)
ProForce Debris Blower Page 1 -- 3 Safety
While Operating
1. Operator should be on the tow vehicle when starting
the engine and when operating the ProForce Debris
Blower . Stay away from the blower when it is engaged.
2. Before starting the engine on the tow vehicle, refer
to tow vehicle Operator’ s Manual for safe starting proce-
dures.
3. Do not run engine of ProForce Debris Blower or tow
vehicle in a confined area without adequate ventilation.
Exhaust fumes are hazardous and could possibly be
deadly.
4. Be aware of the blower nozzle direction and do not
point it at anyone. Keep away from the nozzle opening
during machine operation.
5. Do not touch engine or exhaust system while the De-
bris Blower engine is running or soon after it is stopped.
These areas could be hot enough to cause burns.
6. If abnormal vibration is detected, shut off blower and
stop tow vehicle immediately. Determine source of
vibration and correct problem(s) before resuming the
use of blower.
7. While operating, the combination of the tow vehicle
and the ProForce Debris Blower may exceed noise lev-
els of 85dB(A) at the operator position. Hearing protec-
tion is recommended for prolonged exposure to reduce
the potential of permanent hearing damage.
8. Before leaving the operator’s position of the tow ve-
hicle:
A. Park on level surface and stop ProForce Debris
Blower engine. Make sure that all machine motion
has stopped.
B. Ensure that tow vehicle transmission or traction
lever is in neutral, set parking brake, stop engine and
remove key from ignition switch.
C. Wait for all moving parts to stop before leaving
the tow vehicle.
D. If blower use is complete, turn ProForce Debris
Blower ignition switch OFF and remove key from
switch.
Safety