Service Manual

ProPass 200 Electrical SystemPage 4 -- 3

General Information

Operator’s Manual

The Operator ’s Manual provides information regarding

the operation, general maintenance and maintenance

intervals for your ProPass machine. Refer to the Opera-

tor’s Manual for additional information when servicing

the machine.

Machine Hydraulic Control

ProPass 200 machines use either standard hydraulic

controls or electronic hydraulic controls to allow the op-

erator to change machine settings.

Machines with standard hydraulic controls include

manual hydraulic controls on the front of the ProPass

hopper to adjust hydraulic flow to the floor and rear op-

tion (twin spinner or conveyor) motors (Fig. 1). A

pendant electrical control allows the operator to ener-

gize the floor and rear option from the operator position

of the tow vehicle.

Machines with electronic hydraulic controls include a

wireless remote to electrically adjust hydraulic flow to

the floor and rear option (twin spinner or conveyor) mo-

tors (Fig. 2). The remote allows initial adjustment of the

floor and spinner motors as well as making adjustments

possible while the machine is operating. An E--Stop but-

ton on the machine disables the electrical system to pre-

vent unexpected machine operation.

Figure 1

1. Floor control

2. Rear option control

3. Pendant harness

Figure 2

1. Wireless remote

2. E--Stop button

3. Power lead harness

4. Optional power pack

Electrical

System