Setup Instructions

Page 12
Note: Ensure that the pressure and return hoses are
attached to the rear of the Workman and do not come
in contact with the option.
NOTE:
When truck mounting a Wireless ProPass,
install the 45 degree elbow into the hydraulic block
for the tow-vehicle hydraulic pressure hose.
29. Connect, and then place the electrical controller in
the cab of the tow vehicle.
30. Remove the lifting bracket from the inside of the
hopper assembly. Reinstall the bolts in the hopper
assembly.
Your ProPass is now ready for operation. Refer to the
Operator’s Manual before operating the ProPass.