Operator's Manual

Page 31
4) Press to exit (hydraulics will stop)
CHANGING PRESET WHILE OPERATING:
1) Press , OR – FLOOR and
SPINNER settings will be displayed
2) Press
to ENGAGE and STORE
to WORKING MODE
TO STORE SPINNER SPEED TO PRESET
WHILE IDLE:
1) Press to view current saved setting on
LCD display
2) Set
to desired percentage
3) Press
to STORE the setting
(hydraulics will activate)
4) Press and hold
and ONE of the PRESET
numbers
, OR
5) Press
to exit settings (hydraulics will
stop)
TO STORE FLOOR SPEED TO PRESET
WHILE IDLE:
1) Press to view current saved setting on
LCD display
2) Set
to desired percentage
3) Press
to STORE the setting
(hydraulics will activate)
4) Press and hold
and ONE of the PRESET
numbers
, OR
5) Press
to exit OPTION settings
(hydraulics will stop)
TO STORE SPINNER SPEED TO PRESET
WHILE OPERATING:
1) Set to desired percentage
2) Press
to STORE to WORKING MODE
3) Press and hold
and ONE of the PRESET
numbers
, OR
TO STORE FLOOR SPEED TO PRESET
CHANGES WHILE OPERATING:
1) Set to desired percentage
2) Press
to STORE to WORKING MODE
3) Press and hold
and ONE of the PRESET
numbers
, OR