Operator's Manual

TheLCDacknowledgesthenewstoredcommand
bydisplayingFLOORSTORE.Thisvalueisused
wheneithertheFLOORSTARTorALL
STARTbuttonispressed.
ChangeorStoretheOptionSpeed
Setting
ThestartingspeedfortheOptionoutputcanbe
changedatwill.Whenchanged,thenewvalueis
notstoredinthecurrentworkingmemoryunlessthe
OPTIONSTART
buttonorALLSTART
buttonispressedagainwhiletheOptionisactive.The
storedvalueisusedanytimethereafterwhentheALL
STARTispressedorwhentheOPTIONSTART
ispressed.Tochangethevalue:
1.PresstheOPTIONSTARTbutton.The
previewvaluedisplays.
2.Adjustthecommandtothedesiredspeedsetting
usingtheOPTIONINCREASESPEED
buttonortheOPTIONDECREASESPEED
buttonwhilewatchingtheLCD.
3.PresstheOPTIONSTARTbuttonagainto
starttheBaseUnitOptionOutput.
4.PresstheOPTIONSTARTbuttononcemore.
TheLCDacknowledgesthenewstoredcommand
bydisplayingOPTIONSTORE.Thisvalueisused
wheneithertheOPTIONSTARTorALL
STARTbuttonispressed.
AlternateStoreFloorCommand
SettingMethod
1.PresstheALLSTARTbuttontodisplaythe
previeworSETONLYmode(FLSandOPTS).
2.Adjustthecommandtothedesiredspeedusingthe
FLOORIncrease
orFLOORDecrease
button.
3.PresstheALLSTARTbuttonagaintorunthe
FloorandOption.
4.PresstheALLSTARTbuttonwhileboth
FloorandOptionarerunning.Thedisplay
acknowledgesthenewstoredcommandswithALL
STORE.
Note:BothFloorandOptionmustberunningfor
ALLSTOREtowork.Ifonlyoneorneitherare
running,theALLSTART
commandwillbe
interpretedasarequesttoeitherstartthemboth,
ortostarttheonethatwasnotrunning.Nothing
isstoredandthecommandspreviewedarethe
previouslystoredFloorandtheOptioncommands.
Itisimportanttorealizethatthestoredcommand
fortheFloorisusedtwice,onceintheeventofan
individualcommandusingFLOORSTART
,
andonceintheeventofacombinedactionusing
ALLSTART
;ineithercase,itisthesame
number.
StoreorChangetheAllStart
SpeedSetting(ALLSTORE)
BoththeFLOORandtheOPTIONmustberunning
beforetheALLSTOREspeedsettingcanbestored
inmemory.
Note:IfonlyoneorneitherFLOORandOPTION
arerunning,theALLSTARTcommandwillbe
interpretedasarequesttostartboth,ortostarttheone
thatisnotrunningwhiletheotherisrunning.Nothing
isstoredandtheactivecommandisthepreviously
storedFLOORcommandandthepreviouslystored
OPTIONcommand.
1.PresstheALLSTART
buttontostartthe
FLOORandtheOPTION.
2.SetthedesiredspeedsofbothFLOORand
OPTIONbyusingtheappropriateIncreaseand
Decreasespeedbuttonsforeachoutput.
3.PresstheALLSTARTbutton
whilethe
FLOORandOPTIONarerunning.
TheLCDacknowledgesthenewregularcommand
forbothoutputsbydisplayingALLSTORE.
30