Operator's Manual

5.Turntheconveyorbeltonandcheckifthebeltis
slipping.
6.Ifso,stopthebeltandtightenbothadjusternuts
halfaturn.Donotover-tension.
7.Repeatsteps5and6untiltheconveyorbeltstops
slipping.
8.Tightenthelockingnutsandinstalltheyellowsafety
covers
ConveyorBeltTracking
Theconveyorbeltsystemisself-tracking.Boththefront
andrearrollershaveagrooveinthemiddleforthebelt’s
V-guidetorunin.Sometimes,thebeltmaytrackoutside
thegrooves.Totrackthebelt:
1.Determinewhichsidethebeltistrackingtowards.
2.Removethesafetycoversfrombothfrontcorners.
3.Onthesidethebeltistrackingtowards,holdthe
endofthetensionerrodstationary,thenloosenthe
lockingnutandtightentheadjusternutbytwoats
ofthenut(
Figure49).
4.Tightenbothlockingnutsandturnontheconveyor
belt.
5.Checkthetrackingmovement.Repeattheabove
stepsuntilthebelttracksbacktothecorrectposition.
Important:Bepatient!Donotover-tensionthe
belt.
6.Installbothofthesafetycovers.
WashingtheProPass
Salts,roadtar,treesap,fertilizers,orchemicalsmay
damagethepaintednishoftheProPass.Washoff
thesedepositsassoonaspossiblewithdetergentand
water.Additionalcleanersorsolventsmaybeneeded,
butensurethattheyaresafeforpaintedsurfaces.
WARNING
Donotuseammableuidsorcleaners
withtoxicvapors.Followthemanufacturer’s
recommendations.
Important:Donotuseahigh-pressurewasher.
Thiscanremovepaint,safetydecals,andgrease,
andcanalsodamagecomponents.
1.Removetheoptionbeforecleaningandwashit
separately.
2.Removehandheld.
3.WashthebodyoftheProPasswithwarmwaterand
amilddetergent
4.Completelyrinseoffthedetergentresiduewithclean
waterbeforeitdries.
5.Removethebeltcleaningscraperassemblyfromthe
rearoftheProPass(Figure50).
Figure50
1.Beltcleaningscraperassembly
6.RaisethefrontoftheProPassashighasnecessary.
7.Ifyouhaveatruck-mountedProPass,usethelift
cylinderonthetowvehicle.(Seethetowvehicle’s
owner’smanual.)
8.Ifyouhaveatow-behindorTrucksterdirectconnect
chassis,usethejackstandonthechassis.
9.Fullyopenthereargateandspraywaterinsidethe
hopperassemblyandthereargatearea.Inspectthe
sidesealsandreplaceifnecessary.
10.Locatethecleanoutdecalonthefrontofthe
ProPass(
Figure51),usingagardenhose,spray
throughthefrontguardmeshuntilthebellypanis
completelyclearofmaterial(
Figure52).
Note:Whenthecoversareremovedforgreasing,
taketheopportunitytowashoutanytrapped
spreadingmaterial.
Figure51
1.CleanOutDecal
38