Operator's Manual

Page 35
IMPORTANT: Be patient! Do not over-tension the belt.
6. Install both of the yellow safety covers.
How to Lubricate the ProPass
o Use an automotive, all-purpose grease.
o Lubricate regularly, after 25 hours of normal
operation.
o Lubricate daily when operating in extremely dusty
and dirty conditions.
o Lubricate all bearings, bushings, and chains.
Lubrication Procedure
Several grease fittings are located on the ProPass and the
tow-behind chassis (Figure 20).
1. Clean the grease fittings.
2. Pump the grease into the bearings and the bushings.
3. Clean off the excess grease.
4. Clean and repack the wheel bearings every year or
every 300 hours of operation.
Figure 20: Grease fitting on Base Model
(one at left front, one at right front)
Figure 21: Grease fitting on Base Model
(one at left rear, one at right rear)
Figure 22: Grease fitting on tow-behind chassis
(front and rear, left and right). Grease once per year.