Installation Instructions

7
InstallingTopDresser
WireHarnessandOptional
Equipment
NoPartsRequired
Procedure
Important:Whenroutingeitherthehydraulic
hosesortheelectricalwireharness,always
makesurethatyouroutethemawayfromofall
hot,sharp,ormovingcomponentsandalways
ensurethatthereisnostressonthehosesor
wireharness.Thismayrequirelooseningand
repositioningthehydraulichoseatthefront
bulkhead.
1.Routeandconnectthetopdresserelectrical
harness;refertotheOperatorsManualforthe
topdresser.
Note:Iftheelectricalconnectionisinstalled
nearthebatteryoftheWorkmanvehicle,route
theelectricalpowercordfromthetopdresser
tothebackofthevehicle,atthepivotlocation,
thenforwardtothebattery.
Note:Iftheelectricalconnectionisinstalled
attherearofthevehicle,routeandsecurethe
electricalpowercordtothehydraulicpressure
andreturnhosesfromthefronttotherearofthe
topdresser.
2.Installtheoptionalequipmentandconnect
thehydraulichosestothetopdresser;refer
totheInstallationInstructionsfortheoptional
equipment.
Note:Ensurethatthepressureandreturn
hosesareattachedtotherearoftheWorkman
anddonotcontactwiththeoptionalequipment.
8
InstallingtheSideShields
Partsneededforthisprocedure:
1
Leftsideshield
1Rightsideshield
10
Flange-headcapscrew(1/4x3/4inch)
6
Flangelocknut(1/4inch)
Procedure
g288618
Figure26
1.Leftsideshield
2.Rightsideshield
1.Aligntheslotsinthesideshieldwiththeslots
inthe2shieldsupportsofthecenterandrear
crossmembersandtheL-bracketofthefront
crossmember(Figure27).
12