Installation Instructions

12.Attachaliftingdevicetotheliftingbracketbolted
insidethehopperassembly(Figure5).
Figure5
1.Liftingbracket
13.Usingthetemporaryliftingdevice,lifttheProPass
uphighenoughtobacktheProGatorunderneath.
14.LowertheProPassdownontotheProGatorandline
upthemiddleholesthatmeasure26-3/4inches(67.9
cm)fromthefrontofeachsiderailoftheProPass
withtheholesofthecentercrossmember.
15.SecuretheProPasstotherearandcentercross
members(6locations)with(2)5/16x3inchbolts,
.344I.D.atwashersandangelocknutsand(4)
5/16x1-1/4inchbolts,.344I.D.atwashersand
angelocknuts(
Figure6).
Figure6
(Leftsideshown)
1.Centercrossmember
3.Frontcrossmember
2.Rearcrossmember
16.Usingthevehicleliftcylinder,lifttheProPassup2
inches(5cm)toinstallthefrontcrossmember.
17.SecureeachsideoftheProPasstothefrontcross
memberwith(2)5/16x3inchbolts,.344I.D.at
washersandangelocknuts(
Figure6).
Note:Toeasetheassemblyofthefrontbolts,the
driveguardsmayberemovedorthemountingbolts
maybeinstalledfromthebottomup.
18.Mounttheleftsideshieldtotheleftendofthecross
memberswith(5)1/4x5/8inchangeheadbolts
andangelocknuts(
Figure7).
2
2
g019140
Figure7
1.Leftsideshield2.Mountingfasteners
19.Mounttherightsideshieldtotherightendofthe
crossmemberswith(5)1/4x3/4inchangehead
boltsandangelocknuts(Figure8).
2
g019141
2
Figure8
1.Rightsideshield
2.Mountingfasteners
20.Routetheoptionhoses(spinner&conveyor)
throughtherearoftherightsideshieldanddown
totheoption(Figure9).
3