FORM NO. 01-502-0680 | OPERATOR'S MODEL NO.
FOREWORD Thank you for buying a high quality Toto turf care product. To get the best performance from this machine, operate and maintain it according to the instructions in this manual. Toto also wants to stress the importance of safety. You and anyone else using or maintaining this machine are strangely urged to read this manual, especially all the safety instructions. DANGER, WARNING and CAUTION, used with the triangular safety alert symbol, highlight safety messages.
TABLE OF CONTENTS SAFETY INSTRUCTIONS OPERATING INSTRUCTIONS .. & SPECIFICATIONS STORAGE .7 BEFORE OPERATING . IDENTIFICATION 1 CONTROLS THE TOR PROMISE Back Cover SAFETY INSTRUCTIONS “personal safety instruction”. Read and understand the instruction because it has to do with safety. Failure to comply with the instruction may resumption personal injury. The safety alert symbol means CAUTION, WARNING or DANGER BEFORE OPERATING 1. Read and understand the contents of this .
SPECIFICATIONS FRAME: All welded cites! construction SAND BLADE: 10 ga., 40" wide, spring loaded. BEFORE OPERATING ATTACH SAND BLADE TO SAND PRO 14 Flg. 1) 1. Attach the Mount Arms %o the Sand Pro using the 1/2" x bolts and hardware. Tighten ail bolts. 2. Attach the Lift Arms to the Mount Arms using the 5/8" x bolts and hardware. Tighten bolts enough 10 allow the arms to pivot. 3. Mount the Lift Arm Braces to the inside of the ' Lift Arms as shown in Fig. 1.
CONTROLS LIFT HANDLE (Fig. 2) CHAIN (Flg. 3) 1. The Lift Handle is used to lift the Sand Lads 1. The hooks on the end of the chain has two into place in operating or transport positions. attaching positions. One is for transporting and the other is for operating. Transport Position LHt Handle Operating Position RH.LHtArm Figure 2 Figure 3 4 OPERATING INSTRUCTIONS 1. Transport Sand Pro to the site. 3. When finished, place the chain hooks in the transport position before transporting. 2.
STORAGE 1. Th roughly clean the Sand Blade, 2. Check all fasteners. Tighten if necessary. IDENTIFICATION AND ORDERING MODEL AND SERIAL NUMBER The SAND BLADE 240 has two identification numbers: a model and serial number. The two numbers are stamped on a plate which is riveted to the R.H. Lift Arm. In any correspondence concerning the SAND BLADE 240, supply model and serial numbers to be sure that the correct information and replacement parts are obtained.
The Moro P promise A ONE YEAR LIMITED WARRANTY The Tore Company promises to repair your TOR Product if defective in materials or workmanship.
