Service Manual

GreensPro 1200 Page 3 - 5 Gasoline Engine
Gasoline
Engine
Service and Repairs
Engine
Removal
(Figures 2 through 8.)
1. Park machine on a clean, level surface with the
transport wheels in the raised and locked position.
Make sure engine is OFF. Remove spark plug wire
from the spark plug.
2. Close the fuel shutoff valve.
3. Remove transmission cover from machine (see
Transmission Cover in the Service and Repairs section
of Chapter 5 - Chassis).
Figure 2
4. Remove two nuts (1), two washers (2), two cap
screws (3), and four spacers (4).
Figure 3
5. Remove three lock nuts (6), three cap screws (7),
and six flat washers (8).
6. Remove rear support frame (5).
Figure 4
Figure 5
NOTE: Cap screws (10) can be accessed through
holes in the frame.
7. Remove lock nuts (9), cap screws (10), and flat
washers (11).
8. Remove the engine.
2 3 41
5
6 7 8
11109
11109