Service Manual

GreensPro 1200 Page 3 - 7 Gasoline Engine

Gasoline

Engine

Installation

(Figures 9 through 15.)

NOTE: Machines with serial numbers above

313000000 include an engine that has a different

output shaft and collar than earlier machines. Use the

procedure that matches your engine collar assembly.

Figure 9

1. For machines with serial numbers below

313000000, install square key (2) and engine collar (3)

on the engine output shaft, positioning collar the same

distance as noted during removal. Secure the engine

collar by tightening set screw (4).

Figure 10

2. For machines with serial numbers above

313000000, install engine collar (8), engine shaft

spacer (7), and square key (6) on the engine output

shaft. Secure using socket-head cap screw (11), lock

washer (10), and flat washer (9).

Figure 11

3. Install drive coupling (12) using two lock nuts (13),

flat washers (14), and cap screws (15).

1. Engine (machine serial number below 313000000)

2. Square key

3. Engine collar

4. Set screw

5. Engine (machine serial number above 313000000)

6. Square key

7. Engine shaft spacer

8. Engine collar

9. Flat washer

10. Lock washer

11. Socket-head cap screw

151413