Service Manual

Hydraulic System Page 4 - 14 GreensPro 1200
NOTE: The Hydro-Gear BDR transmission used in
your GreensPro 1200 is illustrated in Figure 16. If
transmission part numbers are not identified in your
Parts Catalog, contact your Authorized TORO
Distributor. Before disassembling the transmission,
make sure that the outside of the transmission is
thoroughly cleaned. For service of transmission, see
the HYDRO-GEAR BDR SERVICE AND REPAIR
MANUAL at the end of this chapter.
28. Retaining ring 37. Retaining ring (2 used) 46. Charge pump housing
29. Bearing retainer 38. Bypass plate 47. Cap screw (2 used)
30. Slot guide 39. Bypass actuator 48. Retaining ring
31. Trunnion arm 40. Seal 49. Return arm
32. Gasket 41. Seal 50. Washer (2 used)
33. Seal 42. Washer 51. Screw
34. Control arm 43. Cap screw (9 used) 52. Scissors arm assembly
35. Lock nut 44. O-ring 53. Extension spring
36. Bypass arm 45. Charge pump