Service Manual

Chassis Page 5 - 14 GreensPro 1200

Figure 21

NOTE: Woodruff keys are installed in the upper

steering shaft (13) and steering pivot assembly (25).

Be careful not to lose Woodruff keys during upper

steering shaft and universal joint (26) removal.

9. Loosen two socket head set screws (23) on middle

bearing, and remove middle bearing assembly (22)

from upper steering shaft (13).

10. Loosen cap screw (24) on universal joint (26).

11. Remove upper steering shaft (13) from universal

joint (26).

Figure 22

12. Loosen cap screw (27) and remove universal joint

(26) from steering pivot assembly (25).

13. Using a suitable lifting device, raise and support

the machine to allow removal of the steering shaft.

Figure 23

14. Remove cap screw (29), two flat washers (30), and

lock nut (31), and remove steering pivot rod (28) from

steering pivot assembly (25).

Figure 24

15. Remove two cap screws (32), four flat washers

(33), and two lock nuts (34), and remove steering pivot

assembly (25) from chassis (21).

32 33 34