Service Manual

GreensPro 1200 Page 5 - 25 Chassis
Chassis
Disassembly and Assembly
(Figure 55.)
Figure 55
1. Remove and replace parts as necessary to repair
steering head assembly.
2. The bearing (4) is pressed into the bearing housing
(5). If bearing replacement is necessary, make sure
that new bearing is pressed all the way to the shoulder
in the housing during installation.
1. Cap screw
2. Lock washer (5 used)
3. Fixing collar
4. Bearing
5. Bearing housing assembly
6. Axle bushing
7. Cap screw (2 used)
8. Flat washer (16 used)
9. Front steering head housing
10. Cap screw (4 used)
11. Long steering roller assembly
12. Short steering roller assembly
13. Lock nut (6 used)
14. Pivot shaft assembly
15. Cap screw (4 used)
1
2
3
4
5
13
8
8
15
6
7
7
8
8
9
8
2
2
10
14
11
12
13
8
8
2
2
10